Veelite.com - Carpark, Commercial & Industrial Lighting Products

ParkLED

Wed, 08 Sep 2010 19:46:50 +0100

High performance Indirect LED Carpark luminaire for internal car parks or low height soffits. Available in 2 sizes (30/60 LED or 50/100 LED). Construction: Heavy duty extruded aluminium heatsink optimally engineered and designed for low thermal resistance with die-cast aluminium endcaps. Thermoformed canopy and lens with extruded aluminium top housing. IP65. Optics: Indirect reflector system using facated MIRO reflector (minimum 94% reflectivity).

Driver: High power factor constant current: 350mA and 700mA.

Light Source: Lumiled rebel array. Colour temperature: 4250K +/- 250K. Aluminium metal clad board for better heat transfer.

Size 1: 30 LED 75 W or 60 LED 69 W.

Size 2: 50 LED 131 W or 100 LED 120 W.

Mounting: Standard mounting is direct to ceiling using the separate hanger plate provided. Alternatively, unit may be pendant mounted to rigid conduit (by others) yoke mounted or specified with a through-wire provision. Finish: Standard finish is satin aluminium similar to RAL 9006. Extruded (finned) heatsink has a clear anodized finish. Options: Available with Occupancy and Daylight control system for energy savings. Emergency version on request. Mounting: Directly to Ceiling. Options for Tru-wiring or wiring from above on request.

Mini Optra

Wed, 08 Sep 2010 19:46:50 +0100

Efficient Carpark Luminaire providing high light levels with good uniformity and at wide spacings. Benefits include complete cut-off, architectural appearance, low glare, lamp wattages to 97w LED or 150w Metal Halide.

Options include Asymmetric reflector (to minimise back spill), internal photocell and dimming (on/off or high/low) for energy saving in off peak periods. A larger version is also available (see separate web page).

Construction: Die Cast aluminium with internal Ballast and Optical Housings. IP65.

Lamp Access: Top of the Fitting hinges to provide tool-less lamp access and relamping.

Installation: Via integral Mastfitter - Max Spigot size: 60mm.

Reflector: Symmetric distribution as standard. Optional asymmetric (ie. internal shield which is adjustable on site).

Gear: Internal as standard.

Lamps: 97w LED or 150w Metal Halide.

Finish: Grey RAL 9006 as standard. Other colours on request.

Helix Series

Wed, 08 Sep 2010 19:46:50 +0100

Architectural luminaire suitable for commercial centres and retail centres.

Construction: Separate internal die-cast aluminium luminaire IP65 within a stainless steel external cone.

Lens: Polycarbonate. Installation: Side entry on 60mm spigot. Lamps: 70-150w HPS, 70-200w Metal Halide, Compact Fluorescent or QL Lamps on request. Options: LED, polished finish. Finish: Blasted finish on stainless steel. RAL colours on request.

Smartlite Series

Wed, 08 Sep 2010 19:46:50 +0100

Energy efficient wall mounted luminaire suitable for perimeters, landscapes and yards. Option for built in sensors and/or low output setting. Construction: Aluminium base with a polycarbonate body. IP65 Finish: Black finish Reflector: High purity anodized aluminium reflector. Lamps: 26w T/E, 2 x 26w T/E, 42w T/E, 2 x 42w T/E, 70w MH and 70w HPS. Options: 1) Occupancy Sensor (on CFL versions). Typical range 6m (Sensitivity can be reduced) and delay of 2 minutes (adjustable 10 seconds to 5 minutes), with default to off. 2) As 1) above, except default to 10% light output. 3) Photocell. 4) Emergency (on max 2x26w or 1x42w versions only).

Eco Series

Wed, 08 Sep 2010 19:46:50 +0100

Stand alone light unit, designed to run without connection to mains electricity supply, using a combination of wind and solar power and a backup battery. Occupancy and Daylight control is provided in the luminaire to prevent unnecessary usage and maximise battery reserves.

Construction: Typically an 8m flanged octagonal pole with turbine, solar panel and luminaire. All items designed for modular upgrade as technology allows. Batteries are stored in a separate box at base of pole. Finish: RAL colour if requested. Wind Turbine: 200w Solar Panel: 80w Luminaire: 60w LED Unit with integral Photocell & occupancy sensor , designed for instant start & delayed switch off after occupancy detection.

Connaught

Wed, 08 Sep 2010 19:46:50 +0100

Attractive uplighter, suitable for higher ceilings (typically 4m to 10m) in hotels and restaurants, banks, churches, libraries and historic buildings. Construction: A lumious acrylic shallow bowl, surrounded by a spun metal frame, suspended on a metal stem up to 1m long. Finish: Anodiseed aluminium as standard. A variety of colours or metallic finishes available on request, e.g. lacquered Brass, Chrome or painted to a RAL, etc. Lamps: Up to 6X55w TC-L Compact Fluorescent provide high efficiency uplight, and a circular T5 illuminates the bowl. Options: A selection of ornamental chains or rods available. Height is adjustable, dimming / occupancy control and emergency versions available.

Wand

Wed, 08 Sep 2010 19:46:50 +0100

Architecturally designed "Wand" light, specially manufactured to client specification. Construction: Rooted stainless steel base (or galvanised steel painted to RAL) available up to 5m height with acrylic or polycarbonate lens (Max 3.5m Height). Total max overall height: 8.5m mirrored reflector in cap. Finish: Stainless steel base with bead-blasted finish. Polished bands added for effect. Other patterns on request. RAL colour of choice for galvanised steel versions. Lamps: 70w metal halide, other lamps on request. Including colour changing LEDs. Options: Height - stainless or galvanised steel base - cast acrylic, acrylic or polycarbonate lens - RAL finish, rooted or flange mounted.

Docklite

Wed, 08 Sep 2010 19:46:50 +0100

Robust Luminaire used for the illumination of Loading Bays and the internal of Trucks during loading and unloading, suitable for Incandescent, CFL or LED lamp types.

Construction: Steel construction. IP20. A switch is provided on the 1m Elbow arm for local control.

Installation: A minimum 2m mounting height is recommended. A steel plate (76mmx127mm) is wall bolted. The arms and head are then added. 2m of cable supplied.

Finish: High visibility yellow.

Lamps: Incandescent Par 38 lamps, CFL or LED on request.

Warning: Care needed to avoid hot temperature on fitting.

Softbay

Wed, 08 Sep 2010 19:46:50 +0100

Ideal for efficient commercial and Industrial lighting. The refractor is visually attractive, low glare and the uplight element eliminates ceiling darkness. Available in 3 sizes. Construction: The clear acrylic prismatic reflector/refractor is impact resistant and provides excellent control of the light distribution. An extruded aluminium ballast housing (IP20) is available in any finish, including mixed (e.g. Black & White etc). Lamp Access: Via open refractor or with sealed versions by unclipping lens cover. Finish: Anodized aluminium (grey) as standard. White and other RAL’s on request. Lamps: 150w - 450w PMH, Compact Fluorescents, QL, etc. Use coated lamps. Options: Coloured refractors on request. More decorative version with add on features also available. Glass version, IP65 version, fluorescent versions and versions without ballast housing are also offered. Emergency Option: Internal Battery on 42w CFL version. Remote Battery on all other versions. Note size of luminaire may need to be increased to accomodate emergency.

Specials

Wed, 08 Sep 2010 19:46:50 +0100

With over 21 years experience as a designer and manufacturer of industrial, commercial and architectural lighting equipment, we are well placed to manufacture lighting or ancillary equipment to specific customer requirements. If product required is only an alteration or adaptation of an existing product, then there is no minimum size.

Please forward any sketches, images, drawings etc that would help us in costing, together with ideal dimensions and any other requirements known at the early stage.

We will usually be able to give a quick indication of feasibility and estimate of cost. Until we issue a formal quotation, this cost is not binding and delivery dates are never guaranteed.

Tower Bollard

Wed, 08 Sep 2010 19:46:50 +0100

Bollard Luminaire with indirect aluminium reflector, 1m high as standard. Other heights on request. Construction: Extruded, spun and die cast aluminium. IP54. Lens: Glass - clear. Installation: Bollard mounted on separate base plate of 176mm diameter. Rooted version on request. Finish: Grey RAL 9006 as standard. Other colours on request (with white or grey RAL 9006 on the underside of reflector). Lamps: 35w to 70w Metal Halide PAR. Gear: Internal.

S Bollard

Wed, 08 Sep 2010 19:46:50 +0100

Architectural stainless steel bollard. Construction: High grade stainless steel (316 grade) with illuminated slots. IP54. Walls are 3.1mm thick. Shape can be made to order including height, shape of slots and finish. Lens: Acrylic lens as standard. Installation: Rooted as standard. Removable base available. Flange mounted on request. Finish: Blasted finish with polished cap (shown). Other patterns on request. Lamps: 1x18w -24w CFL as standard. Other CFL or LED Lamps on request. Options: Dimmable gear, removable base, variable height, slots cut to order, flanged version, emergency. An occupancy sensor can be fitted internally to switch on/off automatically. Aluminium version on request with RAL of choice.

Louvered Bollard

Wed, 08 Sep 2010 19:46:50 +0100

Louvered Bollard suitable for paths, gardens or plaza areas. Construction: Cast aluminium, IP54. 1.1m high, other heights on request (up to 3m). Flanged mounted version as standard, rooted version on request. Lens: Borosilicate glass as standard with HID versions, Acrylic with CFL versions. Polycarbonate on request, max 50w. Lamp Access: Remove lamp module. Installation: Supplied in 3 parts - lamp module, cylinder and base. Base is fixed to a mounting surface before adding remaining modules. Finish: Grey (RAL 9006) as standard. Other colours on request. Lamps: To 70w HPS & 70w MH, 26w CFL. Options: Emergency option available with CFL version. An occupancy sensor can be fitted internally to switch on/off automatically.

Racklyter

Wed, 08 Sep 2010 19:46:50 +0100

The Racklyter is designed for use with T5 lamps for medium to high bay applications up to 15m high in warehouse aisle or open areas. Suitable for use with sensors (integral or remote) for occupancy or daylight control and available with open or sealed optics. Construction: Housing fabricated from zinc coated steel. Sealed optic version has UV stabilised polycarbonate lens and control gear in separate compartment for cooler operation and longer life. Reflector: 95% reflective aluminium. Medium beam as standard. Narrow beam on request. Mounting: Suspended or surface. Finish: White. Lamps: For 54w T5 lamps in 4 or 6 lamp versions. Various colour temperatures available. T5 Lamps have an average life of 20,000 hours. Control gear: Ballasts are HF Electronic type. Multiple ballasts per luminaire permit easy switching to lower light levels for improved energy efficiency. Sensor controller system: An optional narrow beam occupancy sensor can be mounted on the luminaire. Typically, fittings will remain on while area of sensor coverage is occupied, then switch off automatically, after preset time delay when area is vacated. A photocell version of the sensor is available which will keep the Luminaire turned off if there is enough natural light entering the area of coverage.

F Series

Wed, 08 Sep 2010 19:46:50 +0100

A Heavy Duty range of Floodlights for industrial & marine applications. Construction: Die-cast Aluminium IP65 (IP66 available) Lens: 6mm tempered glass heat & protection fins and separate socket assembly Lamp Access: A gasketed and removable socket assembly provides lamp access from below. Installation: Die-cast aluminium mastfitter, fully adjustable with cast-in aiming calibration to fit 60mm standard spigot/pole or heavy duty galvanised steel ‘U’ bracket. Reflector: Optional narrow (B) or wide Beam (C & D). C supplied as standard. Finish: Grey RAL 9006 as standard. Lamps: 400w – 2000w HID (Note: 250w and other smaller wattages can be supplied in the 400w housing). Gear: Integral (as shown) or remote.

Round Parklite

Wed, 08 Sep 2010 19:46:50 +0100

Multi-storey car park luminaire designed to achieve higher levels of illumination with the minimum number of Luminaires and low energy/maintenance costs. Construction: Die-cast aluminium housing with polycarbonate lens. IP65. Finish: Grey as standard. Other colours on request. Reflector: System provides improved throw and uniformity. Secondary system for Ceiling uplight. Lamps: 70-150w HPS, 70-200w Metal Halide, Compact Fluorescent or QL Lamps on request. Options: • Litematic: Instant Start auxiliary 150w tungsten relay lamp. • Emergency: 50w 12v lamp fitted, for connection to remote power supply. Internal Battery for Compact Fluorescent Versions of Parklite.

Parkdisc

Wed, 08 Sep 2010 19:46:50 +0100

Round, low-profile, fluorescent luminaire for internal car parks or low height soffits. Construction: Steel housing with polycarbonate or acrylic refractor. IP54. Finish: White as standard, other RAL colours on request, e.g. Green on Level 1, Red on Level 2 etc. Reflector: Internal Reflector System in combination with Prismatic lens. Lamps: 2x55w TC-L Options: Available with Occupancy and Daylight control system for energy savings. Emergency version on request. Mounting: Directly to Ceiling. Options for Tru-wiring or wiring from above on request.

Widebay

Wed, 08 Sep 2010 19:46:50 +0100

Pendant Industrial luminaire with excellent light throw characteristics providing high vertical light levels. Ideal for general industrial, warehouse, and food industry application. Construction: IP65 aluminium reflector combined with high impact acrylic refractor permanently sealed to the reflector. IP20 ballast enclosure as standard. IP65 Heavy Duty Housing on request. Lamp Access: Hinged and silicone gasketed optical assembly is held in place by heavy-duty corrosion resistant, high compression latches. Safety cable between optical/ballast assembly permits hands free relamping. Gear: Integral (as shown). Remote on request. Lamps: Up to 450w PMH or 400w HPS. Options: Available with HID dimming system on request. Also available in surface mounted version or in recessed version (Cleanbay).

IL Series

Wed, 08 Sep 2010 19:46:50 +0100

IL Series heavy duty High Bay Lighting, ideal for tough environments or for high mounting heights such as Aircraft Hangers, Power Stations, etc. Construction: Fabricated metal IP20 ballast housing as standard. Optional IP65 heavy duty die-cast encapsulated ballast on request. One piece reflector of heavy gauge aluminium. Cast aluminium lens frame. IP65. Lens: 6mm tempered glass as standard. Teflon lens on request. Lamp Access: Hinged and gasketed lens frame assembly allows convenient access from below. Installation: Via closed hook Lamps: 250w to 1000w Metal Halide. 150w to 1000w HPS. Options: * Litematic: Instant start auxillary 150w tungsten relay lamp. * Emergency: 50w 12v lamp fitted for connection to remote power supply. * Teflon lens (use with protected lamp only). * Teflon bonded glass lens (for food industry). * Remote ballast housing. * Bi-Level dimming.

Aktra

Wed, 08 Sep 2010 19:46:50 +0100

The Aktra is a cut-off floodlight that provides precise light control and restricts glare in a wide variety of architectural and commercial applications. Meets IES definition of cut-off distribution. Construction: Die-cast aluminium housing, with tempered glass lens. IP65. Access: Via Integrally cast heavy duty hinges where top swings up. Installation: Die-cast aluminium mastfitter for 60mm pipe tenon or surface mounted bracket. Fully adjustable with cast-in aiming calibration and non-slip serrated locking teeth. Wall bracket also available. Lamps: To 600w HID. Finish: Grey as standard RAL 9006. Black, white and other colours on request. Gear: Internal

Excelite

Wed, 08 Sep 2010 19:46:51 +0100

Luminaire for carpark and roadway lighting in wattages up to 1000w HID.

Construction:  Option of extruded aluminium side-arm or die cast aluminium mastfitter. Die-cast aluminium housing and lens frame IP65.

Lens: Tempered flat glass.

Lamp Access: Hinged lens frame.

Installation: Side-arm as standard for flat surfaces or round poles Ø76mm - Ø100mm (via Round Pole Adaptor). Tiltable mastfitter option for Ø60mm spigot/pole. Gear with larger wattages (250w +) are remote (in pole).

Reflector: High purity anodised aluminium, high performance 'Opti-Save' streetlight reflector system as standard (max 250w). Forward throw reflector available on request for wattages to 1,000w.

Finish: Grey RAL 9006 as standard. Black or other colours on request.

Lamps: Up to 600w HPS or 1000w MH, or 60w LED.

Merrion

Wed, 08 Sep 2010 19:46:51 +0100

Classic style luminaire with various mounting options, for lamps up to 250w HPS/MH, with high performance 'Opti-Save' reflector system to maximise column spacings and minimise the quantity of Luminaires needed.

Construction: Die-cast dome, with spun aluminium canopy. IP65.

Lens/diffuser: Polycarbonate bowl as standard.

Installation: Pendant mounted with a choice of brackets. Swan-neck bracket shown in product picture above.

Finish: Black, RAL 9005 as standard, inside white. Other colours on request.

Lamps

• 35w-250w MH.

• 70w -250w HPS.

• 60w LED.

Optra

Wed, 08 Sep 2010 19:46:51 +0100

Highly efficient Carpark Luminaire providing high light levels with good uniformity and at wide spacings. Benefits include complete cut-off, architectural appearance, low glare, lamp wattages to 1000w HID and options of side arm version and Asymmetric reflector (to minimise back spill). Mini-Optra also available with LED optics (see separate Web page).

Construction: Die Cast aluminium with separate Ballast and Optical Housings. IP65.

Lamp Access: Top of the Fitting hinges to provide tool-less lamp access and relamping.

Installation: Via integral Mastfitter - Max Spigot size: 60mm.

Reflector: Symmetric distribution as standard. Optional asymmetric (ie. internal shield which is adjustable on site).

Gear: Internal as standard. Remote on request.

Lamps: Up to 1000w Metal Halide or 600w HPS.

Finish: Grey RAL 9006 as standard. Other colours on request.

Supralite

Wed, 08 Sep 2010 19:46:51 +0100

The Supralite is a highly efficient Carpark luminaire providing high light levels with good uniformity and at wide spacings (up to 6 times the mounting height). Mounting height is typically 6m to 12m for the Supralite. Constuction: Impact resistant UV stabilised acrylic outer body with opaque upper half and clear lower half. IP64. Installation: Via integral Mastfitter - Max Spigot size: 114mm. Reflector: Symmetric Square distribution as standard. Optional asymmetric (i.e. reflector has an internal shield on one side to minimise back spill). Finish: Grey RAL 9006 as standard. Other colours on request. Lamps: To 600w HPS or 450w MH with single lamp, or to 2 x 250w HPS/MH with twin lamp arrangement. Any smaller wattages or E27 sockets on request. Gear: Ballast is fitted in base of Column as standard. Other methods on request. Options: Integral Ballast, Wall Bracket, Mastfitter to suit Square Column. EON System provides double lamp life.

Lamp Access: Lamp access via hinged glazing door with spring loaded fasteners for Supralite.