An LED Area Light with Motion Sensor on the same lighting Column was supplied for this Pier in Dublin. The Optra LED luminaire uses 100w LED lighting optics to illuminate the general area surrounding a Ramp which leads from the Pier down to the Pontoon.
Microwave Sensors are mounted on the Pole (see photo) and once movement on the Pontoon, Ramp or Pier is detected, the Optra’s LED lighting module switches on. After a period of no detection, the Luminaire switches off, saving energy. As the LED Area Light with Motion Sensor is switched off for most of the time, energy savings are estimated at 95% in comparison with a traditional system. The LED module is designed to be be removed in the future if needed for upgrade, without having to change the entire Luminaire.
The Optra Luminaire has full cut-off to prevent glare and light spill and is constructed from die-cast aluminium for long life. This external light fitting is widely used at Retail outlets, business parks, amenity & pedestrian areas, hospitals, educational buildings etc.
A larger version of the Luminaire is suitable for 6m, 8m, 10m or 12m lighting columns. Typically 1 of these Luminaire will illuminate an area of 50m x 50m.
LED lighting for external areas, when combined with Motion Sensor control offers tremendous energy saving. With VeeLites LED Bollard range, there is an option of internal motion sensors.
To get a detailed Proposal for your Project using a LED Area Light with motion sensor:
Please send enquiry by email and drawings if relevant. There is no charge or obligation for suitable Projects.
We will calculate how many of the LED Area Light with motion sensors are required and advise light levels. We will advise where they should be located and the cost of the Equipment. Other lighting may need to be added for landscaped areas or to add decorative architectural effect.