Bollards with Motion Sensors

Over 50 illuminated LED Bollards with motion Sensors were installed at Colwick Park Marina, near Nottingham. Many of these are LED Bollards with Emergency system. The Bollards are flanged so they could be installed on the floating walkways.  The Marina has 224 Berths and is owned by Nottingham City Council.

LED Bollards with Motion Sensors

These functional LED Bollards with motion Sensors are offered in 15w or 30w LED optics, in symmetric or asymmetric version, and at various heights up to 2.5m.  The Internal Motion Sensor is an option, the Luminaire can be purchased as an LED Bollard with no Sensors. If internal Sensor control is required, there is an option of either On/off control, or High/Low control. This will typically provide 98% energy saving compared with a conventional Bollard.

With on/off control, the Luminaire (or a group of Luminaires) will switch on once they detect someone approaching.  They will turn off again after a 2 minutes delay after last detection.  This 2 minute delay can be shortened or lengthened to suit local circumstances.

With High/Low control, the operation is the same, except the LED light output will reduce to 10% instead of switching off completely.  This is more suitable in public areas as some visibility is maintained.

LED Bollards can be grouped so that if the first or last Bollard detects any movement, it will trigger all the Bollards to switch on/off (or High/low) as a group.  A similar smaller LED Bollard is available for architectural and household application.

The illuminated LED Bollards are finished in Grey RAL 9006 as standard (other colours on request), 1m high as standard (but at various heights on request (up to 2.3m), rooted or flanged, symmetric or asymmetric types available, and with 4K light output as standard (3K on request).  A mini-version is also available in 10w LED where high light levels are not as critical. Due to their versatility and range of options available, illuminated LED bollards with motion sensors (or without) can be used for both private or commercial use. By changing Drivers on site, alternative light outputs, and energy costs, can be achieved. See Product leaflet on LED Bollard for details.

To get a detailed Proposal for your illuminated LED Bollards with motion sensors  project:

Please send enquiry by email and drawings if relevant. There is no charge or obligation for suitable Projects.
We will calculate the number of LED Bollards with Motion Sensors (or without) required and advise light levels. We will advise where they should be located and the cost of the Equipment. Other lighting may need to be added for landscaped areas or to add decorative architectural effect.

Project Search


By continuing to use this site, you agree to the use of cookies. If you do not accept the use of cookies, simply exit the site. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.